Blog
Metal Roofing in Lubbock: Standing Seam, R-Panel or Stone-Coated?
November 20, 2026 by Fortenberry Roofing
More Lubbock homeowners are asking about metal roofs, usually right after a hailstorm or after a third shingle repair in as many years. Metal can be a great fit on the South Plains, but “metal roof” covers several very different systems. Here is how the three types we install compare, and how to decide whether metal makes sense for your house.

The Three Metal Roofs We Install in Lubbock
Standing seam
Standing seam panels run from the ridge to the eave with raised seams that lock together. The fasteners are hidden under those seams, so there are no exposed screws to back out or leak over time. It’s the cleanest look of the three, and it suits modern homes, additions and porches. It’s also the most involved to install, so it usually costs the most.
R-panel (exposed fastener)
R-panel is the ribbed metal you see on shops, barns and plenty of houses around Lubbock County. The panels are screwed through the face into the decking or purlins. It goes on quickly, it’s the most budget-friendly metal option, and it’s a natural choice for shops, carports and farm buildings. The tradeoff is the exposed screws: their rubber washers age in the West Texas sun and need to be checked over the life of the roof.
Stone-coated steel
Stone-coated steel panels, such as Decra, are steel with a coating of stone granules. From the street they look like shingles, shakes or tile, so they fit neighborhoods where a ribbed metal roof would look out of place. They’re a popular way to replace a worn-out wood shake roof without changing the character of the house.
How Metal Handles Lubbock Weather
Hail. Metal won’t crack or lose granules the way an asphalt shingle can, but it can dent. On standing seam and R-panel, larger hail can leave cosmetic dents even when the panel still sheds water fine. Stone-coated steel hides dents better because of its textured surface. If hail resistance is your main goal, ask us to compare metal side by side with a Class 4 impact-resistant shingle. Both are built for hail country, and the better choice depends on your house and budget.
Wind. Our spring winds pull at anything that isn’t fastened well. Metal panels are large and interlocked, so there are no individual tabs to lift and tear. On older shingle roofs, wind damage is usually what pushes homeowners to look at metal in the first place.
Heat. Metal reflects more of the summer sun than dark shingles, especially in lighter colors. It won’t replace attic insulation and ventilation, but it helps.
Converting a Shingle Roof to Metal
Most of the metal jobs we do on homes are conversions from shingles. Here is what a conversion involves:
- Inspect the decking. We check the roof deck for rot and soft spots, and replace damaged boards. Metal is only as good as what it’s fastened to.
- Decide on tear-off. In most cases we recommend removing the old shingles rather than going over them, so we can see the deck and install a proper underlayment. We’ll explain the options for your roof.
- Underlayment and flashing. New underlayment, plus flashing at valleys, walls, chimneys and vents, is where a metal roof’s long-term performance is decided.
- Ventilation. We make sure the attic still breathes once the new roof is on.
Metal or Class 4 Shingles?
There’s no single right answer. Metal usually costs more up front, and the right panel type depends on the look you want and the building it’s going on. Class 4 shingles cost less and still give strong hail protection. Some insurers also discount Class 4 shingles, so it’s worth checking with your agent. We’ll price both side by side on the same estimate so you can compare real numbers for your home, not averages from the internet.
Why Lubbock Homeowners Call Fortenberry Roofing
We’ve roofed the South Plains from our shop in Littlefield since 1995, and we’re RCAT licensed (#03-0142). We install standing seam, R-panel and stone-coated steel on homes, shops and commercial buildings across Lubbock and the surrounding towns. For panel options and recent projects, see our metal roofing page.
Thinking about metal? Schedule a free estimate. Our phones are answered 24/7.













